Fab King - Fabrication Center that can be used as Radial Arm Polishing, Sink Cut Out Machine, Drill Press, and Stone Router The Fab King Fabrication Center is an all in one piece of fabrication equipment. The Fab King combines a stone router, polisher, and sink cut out machine into one. The Fabrication Center from RYE-Corp builds off of the success of the Scorpion and feedback from granite fabricators across the country. The result is the next step in counter top fabrication equipment. The Fab King uses a 3hp motor with a more rigid cantilever frame for increased stability. Fab King Fabrication Center It's engineered for efficiency, simplicity and reliability to ensure profitability for its users. The system allows for the use of Master/Sector tooling for edge profiling and also increases the router travel to 9 feet. Edge profiling are quick and easy with no threat of scratching the surface. Gantry movement insures smooth travel for the X and Y axis You can Polish Backsplashes Can cut out any sink shape using a template in as a little as 8 minutes 240 Volt Three Phases 3 HP Motor Variable Speed 2,700 to 10,000 RPM Dust Free Operation center and halo water feed Install very easy Water consumption 2 Gallons per minutes, ideally below 10 microns purity.
|