Machine comes with very low hours, less than 400. Very unique machine with radial arm head combined with a sliding table for a much larger work area than any other radial arm machine. Templates are being clamped overhead and traced by a follower pin. No need for a concrete foundation as needed for the Wizard, just place, level and secure to the floor. Machine was designed for working on sinks, floors and kitchens all desired shapes on marble, granite and stone in general . Performs drilling, shaping and polishing of internal and external shapes with and without templates up to 1000x3000 mm . Performs holes from 20 to 320 mm of thickness up to 120 mm. Can polish and shaping automatically rectilinear shapes up to 3000mm (118"). Equipped with a 7.5 HP motor with adjustable speed from 0 to 10000 RPM with tapered tool holder ISO 30. The cooling of the tool via flood cooling. The working head is stationary and the mobile bench , with dimensions 1000x3000 mm (39" X 118")slides on guides in oil bath protected by a casing made of stainless steel. The adjustable speed of the sliding table is electronically controlled to ensure maximum linearity of the movement. Special rubber and stainless steel bulkheads , conveying the water to drain into a designated channel. The vertical movement of the tool can be adjusted manually and via electronic control gear with a maximum stroke of 250 mm. The work piece is clamped by 4 pneumatic cylinders with adjustable pressure . For contouring work , the machine is driven entirely by hand, and this makes it very simple to operate while adding versatile features that make it the ideal machine for small workshops. For linear work, the radial arm can be looked via air brakes at all pivot points and the worktable can be moved via hand wheel for more controlled and efficient processing. Machine allows the use of CNC profiling tools. Or it can be used for the production of prototypes or special pieces that would otherwise require a long process of planning and programming of CNC machines. SPECIFICATIONS Diameter shaped tools : Ø 100 mm = 4" Number and diameter brake discs : # 3 Ø 500 mm (19.6") Maximum working thickness : 12 cm = 4.72". Vertical stroke of spindle : 250 mm = 10". Dimensions of the sliding table : 2000 × 600 mm = 78" x 24". Power: 5.5 KW = 7.5HP Maximum size workable : 3000 × 1000 mm (118" x 39"). Water consumption: 16 L / min. - 4 gallons
|